Audi A3 cruise control
The CAN KONTROL CRUISE is a CAN based retrofit cruise control for the Audi A3. It adds set-and-hold speed control to a car that left the factory without it, using the vehicle's own CAN data rather than a mechanical throttle linkage. Configured to the vehicle at installation. The unit is configured to the vehicle at installation.
- The unit reads road speed and the drive signals it needs from the vehicle CAN bus.
- It adds set, hold and resume cruise control using the vehicle CAN data.
- The behaviour is configured to the vehicle at installation and can be updated.
- It works at 12V and 24V and is configured to the vehicle and application.
| Make | Audi |
|---|---|
| Model | A3 |
| Years covered | All model years, confirmed on enquiry |
| Variants covered | One configuration covers this model, set at installation |
| System | CAN KONTROL CRUISE on the i2CAN platform |
| Voltage | 12V and 24V |
Why fit cruise control to a Audi A3
Base and older Audi A3 models often skipped cruise control, which is exactly the feature drivers miss on motorway journeys. The CAN KONTROL CRUISE adds it from the vehicle's own CAN data, with no mechanical throttle actuator, and behaves like the factory system once configured to the car.
Adding cruise to a Audi A3 makes a long drive easier and more economical, holding a steady speed the driver sets. Because it works off the CAN bus rather than a throttle cable, the CAN KONTROL CRUISE fits cleanly and is set up to the specific vehicle.
Workshop fit off the CAN bus, no-cut inductive option on vehicles under warranty, and free configuration updates from Intellitec, part of Scorpion Group.
Frequently asked questions
- Does the CAN KONTROL CRUISE fit a Audi A3?
- Yes. The CAN KONTROL CRUISE is a CAN based cruise control configured for the Audi A3. Tell us the vehicle and we confirm the configuration for the job.
- Can cruise control be added to a Audi A3 without it from new?
- Yes. The CAN KONTROL CRUISE retrofits set, hold and resume cruise to a Audi A3 using the vehicle's CAN data, configured to the car at installation. Tell us the vehicle and we confirm.
- Can the cruise control be moved to another vehicle?
- Yes. The unit is programmable and can be reconfigured and moved to another vehicle if the fleet changes. Configuration updates are free, handled by us as the manufacturer.
- Does it work at 12V and 24V?
- Yes. The CAN KONTROL CRUISE is configured to the vehicle and works at both 12V and 24V, so one line covers car, van and commercial applications.
- Who makes and supports the CAN KONTROL CRUISE?
- It is designed, built and supported in the UK by Intellitec, part of Scorpion Group, on the configurable i2CAN platform.
Also for the Audi A3
Cruise control for other Audi models
Cruise control for the Audi A3?
Tell us the vehicle and what you need, and an engineer at Intellitec, part of Scorpion Group will confirm the CAN KONTROL CRUISE configuration for the job.