CAN bus interfaces

The CAN KONTROL range.

All 51 interfaces on the i2CAN platform, across three hardware parts.

CK-22 configurable outputs. Single and dual-function lines.
CK-88 configurable outputs. Multi-output and most retrofit.
CK-CV8 outputs plus J1939 and FMS. Commercial, body-builder, EV.

Multi-output & retrofit

CAN KONTROL NAV Sat-nav / head-unit signals: speed, ignition, reverse, illumination, park brake Alternative to CANNECT NAV, NAV3 CAN KONTROL AV Audio-visual retrofit with reverse and illumination priority Alternative to CANNECT AV3 CAN KONTROL MULTI 3 Three configurable outputs, function unassigned Alternative to CANNECT IDR3 CAN KONTROL MULTI 8 Eight configurable outputs, function unassigned Alternative to CANNECT IDR8 CAN KONTROL TAXI Meter feed: speed, door and ignition signals CAN KONTROL SWC Steering wheel control retrofit to aftermarket head units Alternative to CANNECT TOUCH, TOUCH-2 CAN KONTROL CAMERA Reverse trigger for camera and monitor systems Alternative to CANNECT CAMSCAN CAN KONTROL CAMERA 8 Camera and side-scan control, speed-conditioned outputs Alternative to CANNECT CAMSCAN-8 CAN KONTROL PARK FRONT Front parking sensor control Alternative to CANNECT PARK ONE, PARK SM2, PARK ONE 24V CAN KONTROL PARK REAR Rear parking sensor control Alternative to CANNECT PARK ONE (R) CAN KONTROL PARK DUAL Front and rear parking sensor control Alternative to CANNECT PARK TWO CAN KONTROL PARK MULTI Multi-output parking control with speed arming Alternative to CANNECT PARK CAN KONTROL PARKBRAKE Park brake and ignition-park-brake outputs Alternative to CANNECT PARKBRAKE, IGNITION PARKBRAKE CAN KONTROL LOCKS Central locking status and control: lock, unlock, deadlock Alternative to CANNECT REMLOCK CAN KONTROL LIGHTS Sidelight, dip, indicator and brake-light outputs Alternative to CANNECT TURNSIG, LEFT TURN CONTROL CAN KONTROL HIGHBEAM High-beam detection for driving lights via relay Alternative to CANNECT HIGHBEAM CAN KONTROL HIGHBEAM 4 High-beam detection with four configurable outputs Alternative to CANNECT HIGHBEAM-4

Accessories & tools

CAN KONTROL LINK Programming and diagnostic tool, all configs and vehicle files, remote support Alternative to CANNECT RUI, RUI V3
CAN KONTROL Looms Vehicle-specific plug-and-play adaptor looms, built in-house

Colour coding is applied by printed label and sleeve on a common enclosure. Every label carries the colour, the full config name and the group letter. Accessory and tool lines are configured to order.

Which vehicles do we cover? See the vehicle coverage list →

Looking for a CANM8 alternative? See the cross-reference →

Get started

Tell us the vehicle and the signal.

Tell us the vehicle and what you need and an engineer will confirm the part and configuration.