CAN KONTROL LIMIT
CAN-based road speed limiting to fleet and compliance requirements. Built on the configurable i2CAN-8 platform, 12V and 24V.
£55.00 ex VAT Order or ask about fitment →
- CAN-based road speed limiting to fleet and compliance requirements.
- Reads the vehicle CAN bus with a two-wire connection, or a no-cut inductive reader on vehicles under warranty.
- One configurable i2CAN platform, 12V and 24V, rather than a separate part per function.
- UK designed, manufactured and supported by Intellitec, part of Scorpion Group.
- The Intellitec alternative to the Speed Limiting range, PRECISION.
| Configurable outputs | 8 switched outputs plus J1939 and FMS |
|---|---|
| CAN lines | 2 isolated CAN peripherals |
| Voltage | 12V and 24V |
| Configuration | Programmed to the vehicle and application, updatable |
| Platform | i2CAN-8 (Intellitec) |
| Made in | UK, designed and manufactured in-house |
The CAN KONTROL LIMIT is a vehicle CAN bus interface. It reads the signals it needs off the bus and drives configurable outputs, so equipment can be fitted without cutting into the vehicle wiring. It is built on the Intellitec i2CAN-8 platform and programmed to the vehicle and application, so it arrives ready to install.
It is the Intellitec alternative to the Speed Limiting range, PRECISION. Where a single-function interface is fixed to one job and one voltage, the CAN KONTROL LIMIT is configured to the task, works on 12V and 24V, and is backed by the UK manufacturer. If you need a signal that is not on the standard list, we can develop it.
Vehicles we cover
Configured to 232 models and counting. See the full list, or tell us your vehicle.
- Alfa Romeo Giulietta
- Alfa Romeo Mito
- Aston Martin Vantage
- Audi A1
- Audi A3
- Audi A4
- Audi A5
- Audi A6
- Audi Q3
- BMW 1 Series
- BMW 3 Series
- BMW X1
Frequently asked questions
- What does the CAN KONTROL LIMIT do?
- The CAN KONTROL LIMIT cAN-based road speed limiting to fleet and compliance requirements. It reads the vehicle CAN bus and drives configurable outputs, and is set up for the job before it reaches you.
- What hardware is it built on?
- The CAN KONTROL LIMIT runs on the Intellitec i2CAN-8 platform, a configurable vehicle CAN interface designed and manufactured in the UK. One box covers the range; a config file sets the function.
- Is the CAN KONTROL LIMIT an alternative to the Speed Limiting range?
- Yes. The CAN KONTROL LIMIT is the Intellitec alternative to the Speed Limiting range, PRECISION, built on our own i2CAN platform. Tell us the vehicle and we configure it for the job.
Tell us the vehicle and the signal.
Send us the vehicle and what you need to trigger, and an engineer will confirm the CAN KONTROL LIMIT configuration for the job.