Great Wall Steed cruise control
The CAN KONTROL CRUISE is a CAN based retrofit cruise control for the Great Wall Steed. It adds set-and-hold speed control to a pickup without it from the factory, useful on long motorway and towing runs, using the vehicle's own CAN data. Configured to the vehicle at installation. The unit is configured to the vehicle at installation.
- The unit reads road speed and the drive signals it needs from the vehicle CAN bus.
- It adds set, hold and resume cruise control using the vehicle CAN data.
- The behaviour is configured to the vehicle at installation and can be updated.
- It works at 12V and 24V and is configured to the vehicle and application.
| Make | Great Wall |
|---|---|
| Model | Steed |
| Years covered | All model years, confirmed on enquiry |
| Variants covered | One configuration covers this model, set at installation |
| System | CAN KONTROL CRUISE on the i2CAN platform |
| Voltage | 12V and 24V |
Why fit cruise control to a Great Wall Steed
Working pickups cover long distances, often towing, where cruise control steadies the drive and saves fuel, but base models frequently go without it. The CAN KONTROL CRUISE adds it to the Great Wall Steed from the CAN bus, with no mechanical throttle actuator, and is set up to the vehicle.
A Great Wall Steed used for long hauls or towing benefits from holding a steady set speed. The CAN KONTROL CRUISE retrofits that using the vehicle's own CAN data rather than a throttle cable, so it fits cleanly and behaves like a factory system once configured.
Workshop fit off the CAN bus, no-cut inductive option on vehicles under warranty, and free configuration updates from Intellitec, part of Scorpion Group.
Frequently asked questions
- Does the CAN KONTROL CRUISE fit a Great Wall Steed?
- Yes. The CAN KONTROL CRUISE is a CAN based cruise control configured for the Great Wall Steed. Tell us the vehicle and we confirm the configuration for the job.
- Can cruise control be retrofitted to a Great Wall Steed for towing and long runs?
- Yes. The CAN KONTROL CRUISE adds set, hold and resume cruise to a Great Wall Steed without it from new, using the vehicle's CAN data. Tell us the vehicle and we confirm the configuration.
- Can the cruise control be moved to another vehicle?
- Yes. The unit is programmable and can be reconfigured and moved to another vehicle if the fleet changes. Configuration updates are free, handled by us as the manufacturer.
- Does it work at 12V and 24V?
- Yes. The CAN KONTROL CRUISE is configured to the vehicle and works at both 12V and 24V, so one line covers car, van and commercial applications.
- Who makes and supports the CAN KONTROL CRUISE?
- It is designed, built and supported in the UK by Intellitec, part of Scorpion Group, on the configurable i2CAN platform.
Cruise control for other Great Wall models
Cruise control for the Great Wall Steed?
Tell us the vehicle and what you need, and an engineer at Intellitec, part of Scorpion Group will confirm the CAN KONTROL CRUISE configuration for the job.