Renault Maxity cruise control
The CAN KONTROL CRUISE is a CAN based retrofit cruise control for the Renault Maxity. It adds set-and-hold speed control to a van that left the factory without it, using the vehicle's own CAN data rather than a mechanical throttle linkage. Configured to the vehicle at installation. The unit is configured to the vehicle at installation.
- The unit reads road speed and the drive signals it needs from the vehicle CAN bus.
- It adds set, hold and resume cruise control using the vehicle CAN data.
- The behaviour is configured to the vehicle at installation and can be updated.
- It works at 12V and 24V and is configured to the vehicle and application.
| Make | Renault |
|---|---|
| Model | Maxity |
| Years covered | All model years, confirmed on enquiry |
| Variants covered | One configuration covers this model, set at installation |
| System | CAN KONTROL CRUISE on the i2CAN platform |
| Voltage | 12V and 24V |
Why fit cruise control to a Renault Maxity
Plenty of vans are bought in base trim without cruise control, yet spend hours on motorways and trunk roads where it saves fuel and driver fatigue. The CAN KONTROL CRUISE adds set-and-hold speed control to the Renault Maxity using the vehicle's own CAN data, so there is no mechanical throttle actuator to fit, and it is configured to the vehicle at installation.
Retrofitting cruise to a Renault Maxity pays off on long runs: steadier speed, better economy and a less tiring drive. Because the CAN KONTROL CRUISE works from the CAN bus rather than a throttle cable, it goes on cleanly and behaves like a factory system, set up to the vehicle.
Workshop fit off the CAN bus, no-cut inductive option on vehicles under warranty, and free configuration updates from Intellitec, part of Scorpion Group.
Frequently asked questions
- Does the CAN KONTROL CRUISE fit a Renault Maxity?
- Yes. The CAN KONTROL CRUISE is a CAN based cruise control configured for the Renault Maxity. Tell us the vehicle and we confirm the configuration for the job.
- Can cruise control be retrofitted to a Renault Maxity that did not come with it?
- Yes. The CAN KONTROL CRUISE adds set, hold and resume cruise to a Renault Maxity without it from the factory, using the vehicle's CAN data. Tell us the vehicle and we confirm the configuration.
- Can the cruise control be moved to another vehicle?
- Yes. The unit is programmable and can be reconfigured and moved to another vehicle if the fleet changes. Configuration updates are free, handled by us as the manufacturer.
- Does it work at 12V and 24V?
- Yes. The CAN KONTROL CRUISE is configured to the vehicle and works at both 12V and 24V, so one line covers car, van and commercial applications.
- Who makes and supports the CAN KONTROL CRUISE?
- It is designed, built and supported in the UK by Intellitec, part of Scorpion Group, on the configurable i2CAN platform.
Also for the Renault Maxity
Cruise control for the Renault Maxity?
Tell us the vehicle and what you need, and an engineer at Intellitec, part of Scorpion Group will confirm the CAN KONTROL CRUISE configuration for the job.