Renault Kangoo speed limiter
Fitted to a Renault Kangoo, the CAN KONTROL LIMIT caps the van's top speed to a value you set, for fleets that need a consistent limit across the vehicles for compliance or insurance. It takes road speed from the Renault CAN bus and holds the maximum in software, with no mechanical governor. The unit is configured to the vehicle at installation.
- The unit reads road speed and the drive signals it needs from the vehicle CAN bus.
- It holds the vehicle to the configured maximum speed, set to your fleet policy or legal limit.
- The limit is programmed at installation and can be updated as policy changes.
- It works at 12V and 24V and is configured to the vehicle and application.
| Make | Renault |
|---|---|
| Model | Kangoo |
| Years covered | All model years, confirmed on enquiry |
| Variants covered | One configuration covers this model, set at installation |
| System | CAN KONTROL LIMIT on the i2CAN platform |
| Voltage | 12V and 24V |
Why fit speed limiter to a Renault Kangoo
Holding a working Renault Kangoo to a set speed cuts fuel, brake and tyre cost and keeps a fleet inside its insurance and scheme commitments. The CAN KONTROL LIMIT reads road speed off the bus and enforces the limit in software, configured to the value you need, and speed limiting is long-standing group capability through Autokontrol.
Fleet vans get a speed limiter for the same reasons every time: insurance terms, urban work schemes, fuel and tyre wear, and simple consistency across a mixed fleet. A CAN based limiter holds the Renault Kangoo to the set maximum using the vehicle's own road speed, so there is no mechanical governor or throttle linkage to fit. Set once at installation and adjustable as policy changes.
Workshop fit off the CAN bus, no-cut inductive option on vehicles under warranty, and free configuration updates from Intellitec, part of Scorpion Group.
Frequently asked questions
- Does the CAN KONTROL LIMIT fit a Renault Kangoo?
- Yes. The CAN KONTROL LIMIT is a CAN based speed limiter configured for the Renault Kangoo. Tell us the vehicle and we confirm the configuration for the job.
- Can the Renault Kangoo be limited for FORS, CLOCS or an insurance requirement?
- Yes. The CAN KONTROL LIMIT holds the Renault Kangoo to whatever maximum your scheme or insurer requires, set at installation and adjustable if the limit changes. It reads road speed from the CAN bus, so there is no mechanical governor to fit.
- Can the speed limiter be moved to another vehicle?
- Yes. The unit is programmable and can be reconfigured and moved to another vehicle if the fleet changes. Configuration updates are free, handled by us as the manufacturer.
- Does it work at 12V and 24V?
- Yes. The CAN KONTROL LIMIT is configured to the vehicle and works at both 12V and 24V, so one line covers car, van and commercial applications.
- Who makes and supports the CAN KONTROL LIMIT?
- It is designed, built and supported in the UK by Intellitec, part of Scorpion Group, on the configurable i2CAN platform.
Also for the Renault Kangoo
Speed limiter for the Renault Kangoo?
Tell us the vehicle and what you need, and an engineer at Intellitec, part of Scorpion Group will confirm the CAN KONTROL LIMIT configuration for the job.