CANM8 alternative
CANNECT HIGHBEAM alternative: CAN KONTROL HIGHBEAM
Driving lights should come on with the main beam and go off with it. When the vehicle has no high-beam wire to tap, the bus has to tell you.
A small job that goes wrong easily
Take the trigger from the headlamp wiring and you can disturb bulb monitoring. Take it from a message and the original circuits stay as they were built.
One output, one relay
CAN KONTROL HIGHBEAM detects high beam and drives a relay, matching CANM8 HIGHBEAM in the cross-reference. If you need several outputs, HIGHBEAM 4 is covered on the next page.
Part mapping
| CANM8 part | CANNECT HIGHBEAM |
|---|---|
| CAN KONTROL line | HIGHBEAM |
| Function | High-beam detection for driving lights via relay |
| Hardware | CK-2 |
| Made in | Chorley, UK |
Switching from the CANNECT HIGHBEAM?
Tell us the vehicle and the job. An engineer confirms the configuration before anything is supplied.
Thanks, that's with our engineers.
We'll be in touch shortly. For anything urgent, call 0151 482 8970.
Questions about this swap
- How much current can it switch?
- It drives a relay, and the relay carries the load. Choose the relay for your lamps.
- Does it work on a 24V truck?
- The platform is configured for 12V or 24V at installation.