CANNECT PULSE alternative: CAN KONTROL SPEED
You need a road speed feed for a meter, a tracker or a tachograph, and the vehicle has no wire carrying it. The CANNECT PULSE is one way to get it. CAN KONTROL SPEED is another.
Why speed is hard to find on a newer vehicle
The old sender wire has gone, replaced by a message on the bus. Without something to read that message you are left guessing at tap points, and each guess risks a fault on a dashboard that was fine when the vehicle arrived.
One part for both voltages
Where the CANM8 range separates PULSE and PULSE 24V, CAN KONTROL SPEED is configured for either, so one box on the shelf covers a van or a truck. What it outputs is set to suit the device you are feeding, and your vehicle is checked before supply.
| CANM8 part | CANNECT PULSE, also PULSE 24V |
|---|---|
| CAN KONTROL line | SPEED |
| Function | Road speed signal for meters, tachographs, limiters and trackers |
| Hardware | CK-2 |
| Made in | Chorley, UK |
Switching from the CANNECT PULSE?
Tell us the vehicle and the job. An engineer confirms the configuration before anything is supplied.
Thanks, that's with our engineers.
We'll be in touch shortly. For anything urgent, call 0151 482 8970.
Questions about this swap
- What devices can the speed feed go to?
- Meters, tachographs and trackers are the usual ones. Name the device and the vehicle and an engineer confirms the output it needs.
- Is it a drop-in swap for the PULSE?
- It does the same job on the same kind of vehicle, but the configuration is set to the vehicle, so treat it as an alternative and send the details.