Cruise control retrofit

Cruise control for the Toyota GT86

The GT86 is a driver's car, and nobody buys one for motorways. Reaching the good roads, a track day or a car meet usually means a long slog on the motorway first, and a car without speed hold makes those miles drag.

The boring miles before the fun

Rear-wheel drive, a low seat and a revvy engine make it a joy on a quiet road. Getting there is another story: a fixed pedal angle for an hour, and a needle that wanders the second you glance at the sat nav.

Enthusiasts do not want bodges

Owners of a car like this are fussy, and rightly so. They will not accept a box that dulls throttle feel or leaves loose loom behind the dash. If anything goes in, it must look and feel like the factory put it there.

Discreet and reversible

Our module gets its whole picture of the car from the GT86's CAN network, and nothing mechanical is added on the throttle side. Turn cruise off and the GT86 is unchanged. Suitable cars can take an inductive, uncut connection, ideal if originality matters to you.

Fitment
VehicleToyota GT86, coupe
Model yearsConfirmed on enquiry
PartCAN KONTROL CRUISE
CANM8 equivalentCruise Control range
Made inChorley, UK
Voltage12V and 24V

Cruise control for the Toyota GT86

Send the details and an engineer confirms the fit, the configuration and what the installer receives.

Thanks, that's with our engineers.

We'll be in touch shortly. For anything urgent, call 0151 482 8970.